Scleral Lens Care

👁

Inserting Your Lenses

Getting them in

1Wash & dry hands thoroughly. Work over a clean, flat surface and plug the sink drain.
2Fill the lens bowl completely with sterile saline (Lacripure, ScleralFil, or Nutrifill) before picking up.
3Place the filled lens on the silicone inserter and insert as shown at your fitting.
4Always start with the same lens first each time.

✋

Taking them out

1Wash & dry hands before touching your lenses or eyes.
2Work over a clean flat surface with the drain plugged.
3Use the removal applicator as demonstrated — gently break the seal and lift the lens away.
4Remove the same lens first every time.

🧸

After each wear

1Clean with ClearCare (peroxide) — soak for 6 hours minimum to neutralize.
2Alternatively, rub with Boston Simplus and soak overnight in fresh solution.
3Never reuse or top off solution — always use a fresh fill each cycle.
4Clean and air-dry case and applicators. Replace every 3 months.

CleanClearCare or Boston Simplus — cleaning and overnight storage. Available at Target, CVS, Costco, or dryeyerescue.com.

FillSterile saline vials (Lacripure, ScleralFil, or Nutrifill) — for rinsing and filling the lens bowl. Single-use only.

ReliefPreservative-free artificial tears for added comfort while lenses are in.

ToolsSilicone inserter + removal applicator — provided at your fitting. Clean after every use; replace every 3 months.

🚫Never rinse with ClearCare directly — it causes serious pain before neutralization.

⏱ClearCare requires 6 hours to neutralize. Can’t wait? Use Boston Simplus instead.

🔴Boston “Advanced” (red cap) is for cleaning only — not for rinsing or eye contact.

💧Rinse only with sterile saline before insertion — never tap water or multipurpose solution.

📞Redness, pain, or sudden blur — remove lenses immediately and contact our office.

We've copied your review, after you click 'Publish' please paste your review by selecting 'ctrl' + 'v' into the review comments section.